lang: ro

Sealing products for sandwich panels

Profiled sealing elements

Profiled sealing elements are especially recommended for sealing gaps, at both ends of the sandwich panels as well as the upper and lower extremities thereof.

Elemente de etansare profilate

Technical data

Profiled sealing elements have a relatively compact and dense mass, with small cells and are flexible and resistant.

Their main properties are:

  • heat resistance (without distortion at high temperature variations).
  • resistance to different atmospheric conditions.
  • good thermal insulation

From the range of products for sandwich panels, we manufacture sealing elements for the following tehcnical industrial profiles:

T 85 Ruukki / T 135 Ruukki / T 153 Ruukki

Ribbons

Foiled ribbon comprised of a strong adhesive bitumen layer, covered with aluminum foil, highly resistant to environment conditions.

In the case of sandwich panels, all joints must be sealed throughout their length with a self-adhesive ribbon applied in the production stage or self-adhesive Butyl ribbon applied at the construction site. All longitudinal joints must be sealed with an edge-sealing strip (self-adhesive ribbon). Vapor barriers should be applied only if necessary.

Technical data

The materials that comprise sealing ribbons are of EU origin.

Benzi de etansare
Transverse sealing ribbons:
  • Temperature resistance after hardening: -10 degC to +80 degC
  • The ribbons are sold in rolls with the following dimensions:
    • 100, 150 or 300 mm in width
    • 10 meters in length.
Benzi de etansare
Longitudinal sealing ribbons:
  • Temperature resistance after hardening: -10 degC to +80 degC
  • The ribbons are sold in rolls with the following dimensions:
    • 10x3 mm
    • 50x3 mm

Spacer sealings for sandwich panels rooflights

Rooflight sealings are fabricated on our production line from a high-density material, for added UV protection.

Distantiere luminatoare

Product range

  • 35.500.1000 – Megaprofil, fabricated for a thickness range of 40/40/60/80/100 mm;
  • 45.333.1000 – Megaprofil, fabricated for a thickness range of 40/50/60/80/100 mm;
  • Arcelor rooflight sealings, for a thickness range of 40/50/60/80/100 mm

Technical data

Spacer sealings for sandwich panels rooflights are fabricated from chemically expanded polyethylene with cells with open pors. They are manufactured with a 40mm thickness.